DSLRKIT 7 Ports 4POE 1SFP Gigabit Ethernet Passive PoE Switch Injector 24V 72W

Passive PoE devices that support MikroTik PoE with an input voltage of DC 8-30V or 18-30V<br><br>Compatible 24V Ubiquiti PoE:<br>UAP-AC-LR UAP-AC-LITE<br>PowerBeam M5 PBE-M5-400-ISO<br>Isolation M5 / IS-M5<br>PowerBeam PBE-M5-620, PBE-M5-400, <br>PrismStation 5AC / PS-5AC<br>Rocket Prism 5AC Gen 2 / RP-5AC-Gen2<br>LiteBeam LBE-5AC-23, LBE-5AC-16-120<br>Rocket ac R5AC-Lite<br>PowerBeam 5AC Gen 2 / PBE-5AC-Gen2, PBE-5AC-ISO-Gen2<br>IsoStation IS-5AC<br>LiteBeam LBE-5AC-Gen2<br>NanoBeam 2AC / NBE-2AC-13<br>NanoStation AC / NS-5AC, NanoStation AC loco / NS-5ACL<br>PowerBeam 2AC PBE-2AC-400 <br>UBNT AP/UAP <br>UAP-LR <br>UAP-AC-LR <br>UAP-AC-LITE <br>NanoStation M2 / NSM2 <br>NanoStation M3 / NSM3 <br>NanoStation M365 / NSM365 <br>NanoStation M5 / NSM5 <br>NanoStation Loco M2 <br>NanoStation Loco M5 <br>NanoStation Loco M9 <br>Ubiquiti Rocket M5,M2,M9,M900 <br>Ubiquiti Rocket M3/M365 <br>Ubiquiti Rocket M2 <br>Ubiquiti Rocket M9/M900 <br>NanoBridge NBM9, NB-2G18, NBM3, NBM365 <br>PowerBeam M5 PBE-M5-300-ISO <br>airGrid M AG-HP-2G16, AG-HP-2G20, AG-HP-5G23, AG-HP-5G27 <br>LiteBeam M LBE-M5-23, LBE-5AC-23, LBE-5AC-16-120 LBE-5AC-Gen2 LBE-5AC-LR<br>NanoBeam M NBE-M2-13, NBE-M5-16, NBE-M5-19 <br>PowerBeam PBE-M5-300, PBE-M2-400 PBE-AC-Gen2 PBE-AC-ISO-Gen2<br>airMAX YAGI Antenna AMY-9M16 <br>LiteBeam LBE-M5-23 <br>LiteAP-120 LiteAP-GPS<br>This is a special PoE Switch with 24V DC out, it can not Compatible with 802.3af(48v). It could work only on some special customized 24V PoE device<br>please confirm your device is using DC 24v PoE before you purchase this PoE Switch.<br>If you can not figure out the PoE voltage of your device, we suggest you to buy 48v PoE Switch which can follow 802.3af agreement.<br>This is an Passive Power Over Ethernet switches, including 4 unsolicited PoE Ethernet ports and 2 Uplink ports and 1.25G SFP port. With an external 110V-240V AC to 24VDC power supply adapter, any one of the 1~4POE port can provide output power, each Ethernet port can provide network transmission speeds of up to 10/100/1000Mbps , with Cat5 / 5e / 6 network cable.<br><br>Which do not compatible with IEEE 802.3af and IEEE 802.3at, this is an unusual non-standard 24V unsolicited Power Over Ethernet switch. It supplies power NO MATTER WHAT, so don't plug the "PoE 1X~PoE 4X" side into anything that isn't ready for it.<br><br>Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "PoE 1X~PoE 4X" port, this will damage your device..<br><br>NONE PoE gigabit ethernet device and Uplink device can only access "5~6x ports and SFP port" Please do not access "PoE 1X~ PoE 4X", this will damage your device.<br><br>NOTE. <br>When EXTEND mode enable, the Max bandwidth for the Power Link (PoE) port 1-4 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's bit stream setting. We recommend the value does not over 8Mbps(8192Kbps).<br>(The up-link is not affected, it will always working at 1000Mbps max speed)<br><br>Features:<br>6 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function(port 1-port 4)<br>1x 1.25G SFP Port<br>Support EXTEND mode, max Network Cable length to 250 meters. <br>Midspan Mode-B Unsolicited Power 24V (4,5+/7,8-)<br>Per PoE port Maximum current: 0.84A<br>Supports PoE power up to 72W for all PoE ports, Per PoE port Max 20Watt(24V 0.84A)<br>Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.<br>Full/half duplex transfer mode for each port.<br>Wire speed reception and transmission.<br>Up to 2K unicast address entities per device. Self-teaming, and table aging.<br>PoE power on RJ-45<br>Power+ : pin 4 &amp; pin 5; Power- : pin 7 &amp; pin 8<br>AC to DC power supply<br>Input: 100V~240VAC, 50Hz~60Hz. Output: 24VDC 3A<br>Power Consumption<br>2.0 watts(max with no PD device connected)<br>4 PoE ports Total Max. 48Watt<br>Product Dimensions 130mm W x 60mm D x 30mm H<br>Temperature<br>Operation Temperature:0 ~40℃ (32 ~104℉)<br>Storage Temperature: -40 ~70℃(-40 ~158℉)<br>Humidity <br>Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing<br><br>Item Included:<br>DSLRKIT DIM4P2USG 7 Ports Gigabit Ethernet PoE switch x1<br>AC Power Adapter(DC

• Passive PoE devices that support MikroTik PoE with an input voltage of DC 8-30V or 18-30V
• This is a special PoE Switch with 24V DC out, it can not Compatible with 802.3af(48v). It could work only on some special customized 24V PoE device
• Support EXTEND mode, max Network Cable length to 250 meters.